How To Clean Toilet Bowl Stains - By Using Easy Methods

Porcelain, often called Vitreous China, is a unique clay used for nearly all toilets. Toilet seats are made of a variety of materials. The most common materials for toilet seats are synthetic wood, resin, or vinyl plastic. Verify that the product you intend to use will not harm these substances.

If you want to keep your porcelain toilet in good condition, you should never use a metal scrubby, steel wool pad, or tool in there. You run the risk of developing unattractive, lifeless marks.

Pumice stones can cause cuts. The porcelain finish on a toilet can be damaged by using a pumice stone too forcefully, despite claims to the contrary. Some manufacturers warn against using pumice stones, so it’s a good idea to check the directions before you use them.

Bleach and other cleaning products should never be mixed. You can make a poisonous gas by combining bleach with ammonia or vinegar.

Always use one type of cleaning on a dirty surface. You should take out any leave-in cleaner from the toilet tank before using toilet bowl cleaning, for instance.¹

Be sure to use the toilet bowl cleanser within the bowl only. Exclude exterior applications.

You most likely have mineral stains on your toilet bowl if a simple cleaning doesn’t remove them. Hard water is more likely to contain dissolved minerals, such as calcium, magnesium, and iron, which can leave behind grimy streaks on the surface of your toilet bowl.

However, you may use creative (and every day) household remedies like vinegar and baking soda to remove toilet stains. Regular maintenance following a thorough cleaning should reduce the dangerous stain accumulation and leave your throne shining.

Table of Contents

How Are Stains On Toilet Bowls Cleaned?

Everyone wants to avoid getting their hands dirty in a run-down porcelain castle, but focus on the goal. To get the best possible clean, prepare and scrub your toilet bowl using these steps:

Assemble Your Equipment:

If you’re feeling squicked off, put on rubber gloves. Keep your standard toilet brush close at hand, but you might also want to use a scrubbing brush with firmer bristles for the toughest stains

Drain The Toilet’s Water Bowl:

The valve that connects your water pipes to the toilet must be turned off. Usually, this is a knob that is close to the toilet’s bottom back. Refilling the tank with water is prevented by turning the valve.

Flush Now:

The bowl ought to be almost empty.

After adding your cleaning supplies, scrub. For removing stains from toilets, vinegar, baking soda, and a scrub brush are the best friends. However, there are numerous methods for removing stubborn mineral stains from bathrooms.

Restart The Water Valve:

Your toilet’s tank will probably run dry after you flush away the debris and cleaning solution. Remember to flip the valve back on so you can get on with your normal restroom routine.

Supplies Required For Cleaning Toilets:

Assemble a few cleaning supplies to address stubborn stains in your porcelain sink.

To protect your hands, put on rubber gloves.
Long-handled cleaning brush for toilets
Spray bottle empty
To scrub stains, use a plastic scrubber or sponge.
Used rags

Methods To Treat Toilet Bowl Stains:

White Vinegar.

Distilled white vinegar has a pH of roughly 2.5, making it extremely acidic. Charging the particles facilitates the dissolution of mineral scale by drawing them to water and making them easy to wash away.
Make sure to pour the two to three cups of vinegar directly onto the stains in the basin. Another option is to cover the discoloration with several layers of toilet paper soaked in vinegar.
Allow it to steep for two to three hours as you tidy up elsewhere.
After that, clean and flush it.

Always Remember: Never mix vinegar and bleach. Do not even consider adding bleach to the mixture if you typically clean with it. In reality, combining vinegar and bleach produces a deadly gas.

Vinegar And Baking Soda.

You can increase the potency of vinegar by mixing it with baking soda, another household staple.

Directly apply two cups of vinegar onto the stains. Use your scrub brush to gently stir it about, then leave it for around an hour.
After applying one cup of baking soda to the discoloration, top the baking soda with an additional cup of vinegar.
After 15 minutes, watch the acid vs. base bubble up.
Use a toilet brush to scrub the mixture for any stains. After the vinegar’s acid breakdown, the baking soda’s mild abrasiveness should remove spots. If stains still show up, scrub again after letting the solution set for an additional 15 to 30 minutes.
To remove the solution, flush the toilet.
To prevent scale and stains from resurfacing in your bowl, put some baking soda on it once a day.

Using Baking Soda With Hydrogen Peroxide.

A genuine disinfectant, hydrogen peroxide may remove stains and eradicate unwanted organisms such as bacteria, mold, fungus, and viruses. Similar to vinegar, it works significantly better when combined with baking soda.
Douse spots with half a cup of hydrogen peroxide.
Next, dust the top with one cup of baking soda.
Give the mixture fifteen minutes to sit.
After using a toilet brush to scrub, flush.

Vinegar And Borax.

Another popular household cleanser that works with the minerals in hard water to keep them from building up on surfaces is borax. Similar to the baking soda combo, vinegar can be used to clean toilet rings.
Apply 1/4 cup of borax powder to the spots.
Cover the powder with one cup of vinegar. Give it a good 15 to 20 minutes.
Wipe and flush to get rid of that peering.

Pumice Stone.

A toilet brush just isn’t strong enough to get rid of some stains. You can also attempt scrubbing with something more abrasive after using your preferred cleaner or some good ol’ water. Examples of such materials include:
A wet pumice stone tool, 0000-grade steel wool, and fine sandpaper
Please use this procedure only if all other options have failed, as it may permanently harm the porcelain finish of your toilet. You should be able to prevent scratches by keeping both the toilet and your abrasive tool damp.

Coke.

It seems more like a practical party trick than a cleaning tip, but Coke can effectively flush your valuable soda can in the name of removing stains. Because of the phosphoric acid it contains, Coca-Cola has a pH of 2.6 to 2.7, which is moderately acidic. It cleans similarly to vinegar, theoretically.
Pour about 1-2 cups of Coca-Cola over the discolored toilet bowl.
Give it a whole night to sit.
Rinse and scrub.

FAQs:

How Can Vinegar Be Used To Clean A Toilet Bowl?

Most stains on your toilet bowl are readily removed with a toilet brush, distilled white vinegar, and baking soda. Fill the toilet bowl with two cups of vinegar, and then cover the vinegar with one cup of baking soda. After letting it sit for half an hour, give it a good clean with a toilet brush. Lastly, rinse after flushing.

Which Toilet Bowl Stain Removers Work The Best?

You probably already have the best toilet bowl stain removers in your house, believe it or not. The most prevalent toilet bowl stains can be removed using green cleaning solutions like hydrogen peroxide, vinegar, and baking soda. Starting with the safest, most natural stain removers is our recommendation; if necessary, proceed to more aggressive methods.

How Can Stains On A Toilet Be Removed?

A cup of baking soda should be added to the bowl. Give the vinegar and baking soda a minimum of half an hour to steep. Use a toilet brush to give the toilet bowl a thorough cleaning. Lastly, flush the toilet to get rid of the baking soda and vinegar mixture. Verify whether the stains have been eliminated.

Conclusion

Use a pumice stone to gently clean stubborn stains that are difficult to remove with a toilet brush. But be aware that pumice stones are quite abrasive, and if you apply too much pressure, they may harm the toilet bowl. To find out how much pressure to apply without scratching the surface, test a small, invisible area, like under the bowl’s rim, before attempting to clean a toilet with a pumice stone. If your toilet has reddish-brown stains, it may be rust from rusted pipes. While it is possible to get rid of the stains on your toilet bowl, you also need to deal with the problem that caused the rust.