How To Clean MSR Water Filter? No More Dirt, Just Pure Water

A water filter is one of the most important pieces of equipment for hiking. Being able to filter water is essential if you want to stay hydrated when camping. While there are many varieties and brands of water filters available, the MSR MiniWorks EX Microfilter is among the most well-liked.

The gold standard of hand pump filters is undoubtedly the MSR Guardian Purifier. It’s pricey, quick, and simple to use. It is widely used both domestically and overseas, as it is one of the few filters capable of removing viruses in addition to bacteria and protozoan diseases. The filter itself is incredibly robust and self-cleaning, and the output of water quality is amazing.

The top pick for a hand pump and one of the most dependable models available is the MSR Guardian. It’s somewhat pricey and somewhat large, but it’s quite simple to use and removes anything from viruses to bacteria. Whether you’re traveling abroad or venturing into the bush, this purifier may be used anywhere in the world to keep you happy and healthy by removing even the meanest microorganisms. However, it is unable to eliminate pollutants or heavy metals.

Table of Contents

How Effective Are MSR Filters In Purifying Water?

A powerful filter with a particle size of 0.02 microns is included with this purifier. Although the most of the filters in this review only have hole sizes between 0.1 and 0.2 microns, this one can remove viruses, bacteria, and protozoa. The filter generates tasty, nutritious, and pure water thanks to its hollow fiber architecture.

Unfortunately, it cannot remove pollutants, heavy metals, or smells since it lacks activated carbon. The fact that it is the only type that can withstand the turbidest streams, though, impresses us. This style is great for one- to two-person backpacking trips or international travel.

Directions For Cleaning The MSR Autoflow Filter:

To begin, strain at least half a liter of water into an MSR Dromedary bag or other reservoir.

Holding the clean reservoir above the filter cartridge, remove the inlet hose from its barb on the male disconnect and let the water run back through the cartridge and out of the inlet tube. To get rid of any debris that has gathered in the fibers, let the filter cartridge run through it for at least half a liter.

Manual For Resetting The MSR Hyperflow Filter:

To avoid losing any tiny parts, you should carry out the backflushing procedure in a controlled environment.
First, take off the clean side cover cap and fit it onto the bottle adapter for Quick Connect.
Fill a reservoir or water bottle with at least half a liter of filtered water.
Unscrew the pump inlet from the pump cylinder and take off the inlet hose. Ensure that at this point, no air is pumped through the filter.
Place the huge check valve back in the pump inlet after reversing it.
Once a stroke has been completed, pull the pump cylinder and rotate it clockwise until the piston locks.
To remove the piston from the filter cartridge, use the cylinder.
Remove the tiny check valve from the piston, flip it, and put it back in.
Thread the pump cylinder onto the filter cartridge with caution.
Rethread the pump cylinder’s inlet onto the pump. Once more, avoid forcing air through the filter.
To flush the cartridge, you will now push water through the filter. Move the filtered water with at least ten complete strokes. With each stroke, wait for the cylinder to fill with water.
To prevent air from getting into the outlet while using a hard bottle, such as Nalgene, flip the bottle.
After finishing, disassemble the pump and put the large and small check valves back in the forward flow position that they were originally installed in.
After the pump has dried off, reassemble it.

How To Clean The Filter From The MSR Trailshot:

To begin, just pump water into the bulb until it is halfway full.
Give the filter a 20-second shake up and down.
Squeeze out the soiled water after removing the inlet hose from the nozzle.
Reattach the hose.
You should replace the cartridge if cleaning the filter does not allow the water to flow again.

MSR Thru-Link Inline Filter Cleaning:

After the filter is placed, fill the drink tube with filtered water by sucking on the bite valve to force water through the filter.
Separate the reservoir’s filter from it.
In order to force all of the water back through the filter, blow into the bite valve.
Reattach the reservoir’s filter to it.
Please contact our customer support staff or leave your questions in the comments section below if you have any queries about backflushing your MSR water filter.

Maintenance And Durability Of MSR:

This water filter has very sturdy construction and is really well-made. It has withstood frigid temperatures in addition to being drop tested on concrete up to a height of six feet! Little upkeep is required. The filter continuously cleans itself with each stroke of the pump. Even in turbid water, the filter doesn’t clog as quickly as other models do.

This is a very dependable bomber design. The filter itself has a much longer lifespan than any of the gravity filters we’ve tested—up to 10,000+ liters. This purification system has the longest lifespan of any that we have encountered, and it is capable of eliminating viruses. This handpump is our top pick if you’re looking for a dependable, well-made device that can be used for a variety of tasks. It is low maintenance, self-cleaning, and has several uses.

How Simple Is It To Manage MSR Filtering?

It’s quite easy to use as a handpump. The big handle is quite easy to grasp, plus there’s an additional spot to hold the pump firmly thanks to the cartridge body. The high flow output of the pump readily draws in water and expels it completely in a single cycle. It’s one of the most user-friendly handpumps we’ve tested, making filtration simple and easy.

Although using this hand pump is smooth, hand pumping generally isn’t that great. Hand pumping can be laborious, time-consuming, and demands that you to remain still while unable to perform other camp chores. Even if it produces a great result, a gravity filtration solution is far less labor and preferable if you can afford it. However, it is unable to obtain the same elusive water sources.

FAQs:

Is The MSR Hand Pump Filter Up To Par?

The pinnacle of hand pump filters is undoubtedly the MSR Guardian Purifier. It’s pricey, quick, and simple to use. It is widely used both domestically and overseas, as it is one of the few filters capable of removing viruses in addition to bacteria and protozoan diseases. The filter itself is incredibly robust and self-cleaning, and the output of water quality is amazing.

Is The Pump Filtration System Made By MSR Miniworks Good?

In Mount Rainier National Park, Andrew Reisert is filtering water. Although the Miniworks’ ceramic filter has a long lifespan (2000 liters), it does occasionally need to be cleaned. Should you be searching for a robust and long-lasting pump filter, the MSR Miniworks EX is sure to meet your needs. Among the available pump filtration systems, it’s not our favorite.

3: Is The MSR Guardian A Reliable Filtering Device?

The MSR Guardian is quite simple and quick to pump, which surprised us. This purifier is large and cumbersome despite being incredibly quick and producing excellent water quality. With a weight of one pound, 4.50 ounces, this filtration system is among the heaviest available.

Conclusion:

One particularly user-friendly hand pump that is capable of eliminating viruses in addition to other contaminants is the MSR Guardian Purifier. Its two main drawbacks its high cost and increased weight—might cause some people to search elsewhere. On the other hand, it’s an ideal partner for any overseas or backcountry expedition if you can afford it and don’t mind carrying the additional weight. This really is the solution if you’re searching for anything that can accomplish everything.