Whatever type of hot tub you own, it will require periodic filter cleaning. Cleaning your hot tub filter on a regular basis is one of the most crucial maintenance tasks that any owner can perform. It will prolong the life of the hot tub filter and guarantee that your hot tub remains clean all season long.
We have the lowdown on the best way to clean a hot tub filter and how often you should be doing it, even if there are several ways to go about cleaning your hot tub filter.
How To Maintain The Filter In A Hot Tub
Soak a hot tub filter for several hours in a specific hot tub filter cleaning solution to ensure complete cleaning. Your filter will be fully cleaned of all oils by doing this. You will need a 5-gallon bucket, a hose, and a hot tub cleaner to accomplish this.
To prevent the hot tub from accidentally turning on, turn off the power source.
Verify that the filter chamber is free of any debris that can unintentionally enter the pump.
- Take out the filter. Usually installed into the side wall, you may locate it by observing where water is drawn in and directed towards the pump. The filter chamber should be accessible by a hatch located atop that wall. If you are unable to locate it, specifically consult your owner’s manual to learn how to acquire access.
- Pour water and cleaning solution into a five-gallon bucket. To determine how much to add, refer to the cleaning solution’s directions. Blend thoroughly.
Immerse the filter in the mixture. It has to soak for at least eight hours and up to twenty-four hours.
- To keep the solution warm and help loosen the oils and grime, you can leave it in the sun.
- Use a hose to rinse the filter clean. If you don’t thoroughly rinse it, the cleaning solution will cause your hot tub to foam.
- Allow the filter to air dry entirely.
- In the same manner as it was removed, replace the filter within the filter compartment. Make sure the filter is firmly in place after installation, then shut the lid.
- After making sure there is water in the filter chamber, restart the hot tub. Make sure the hot tub’s returning water isn’t foaming and that you aren’t taking up any air. To get rid of the cleaning solution, rinse and dry the filter once more if you notice foaming.
The Frequency Of Hot Tub Filter Cleaning:
Your hot tub filter needs to be cleaned at different times during the hot tub season. Weekly, monthly, and seasonally, hot tub filters need to be cleaned.
You should use a hose to rinse the filter once a week. Use a hot tub cleaning solution and immerse the filter for the monthly cleaning. Use a cleaning solution, rinse with a filter comb to completely clean in between each filter pleat, or replace the filter for seasonal (or as needed) cleaning.
It is ideal to clean the filter when it is completely saturated with water, regardless of when you choose to do it. This will prevent the debris and oil that become lodged in it from drying out and caked on the filter, making it much harder to remove—even with a cleaner—when that happens.
Weekly Cleaning Of The Hot Tub Filter:
Weekly cleaning is the best way to prolong the life of your hot tub filter. A weekly cleaning keeps trash and algae from growing and lets you know about any possible problems with the chemistry of your hot tub before they get out of hand.
Weekly cleaning of your hot tub requires removing the filter and cleaning any dirt between the filter pleats using a garden hose, not a power washer. Check for rips and tears as you’re cleaning. You will need to replace the filter if you notice any of these.
Cleaning Of The Hot Tub Filter On A Monthly Basis:
The cleaning every month is a little more thorough. Whereas the weekly cleaning is intended to get rid of dirt, you will be cleaning the filter to get rid of the oils and residue.
The steps are the same as those described above:
Pour the water and cleaning solution into a 5-gallon bucket, then let the filter soak for up to 24 hours. It should be rinsed and allowed to air dry before being reinserted.
Cleaning Of Seasonal Hot Tub Filters:
You’ll be doing what you do every week and every month when you clean your hot tub filter in one session at the start and end of the season.
In order to ensure that your filter is clean for the upcoming year and to prevent dirt from actually building up when the hot tub is not in use, always clean the filter at the end of the season before winterizing it. In order to keep the debris and oil loose and the filter damp, the end-of-season cleaning should be completed before emptying the hot tub.
First, take the filter off and look for any rips, tears, or brittleness in it. You should also make sure the core is still strong.
Following the check, make sure to remove as much debris as possible by hosing down the filter.
Fill a five-gallon bucket with water and hot tub filter cleanser, then soak the filter.
Rinse the cartridge with a filter nozzle to get as much of the way into the filter pleats as you can after soaking for at least eight hours.
After letting it dry, replace it.
Replace the filter if you find any damage or discoloration after cleaning.
FAQs:
Is Vinegar A Suitable Cleaner For A Hot Tub Filter?
Indeed, vinegar can be used to clean a hot tub filter. Not only does it eliminate oil, but when you replace your filter, the water doesn’t bubble up. Just combine vinegar and water in a bucket, then immerse the filter for up to 24 hours to clean with it.
Is It Possible To Clean A Hot Tub Filter In A Dishwasher?
The dishwasher is not the appropriate place for a hot tub filter. Because it is abrasive, dishwashing soap will erode the filter membrane.
Is it better to empty the tub or clean the filter first while opening a hot tub?
Prior to adding water to the hot tub, clean your filter if it’s unclean at the start of the season. In this manner, you will avoid having a hot tub full of water without a filter, which would let germs grow and increase the possibility of something sucking into your hot tub pump and injuring it. You can also detect whether the filter is broken or defective.
Is It Better To Empty The Tub Or Clean The Filter First While Opening A Hot Tub?
Prior to adding water to the hot tub, clean your filter if it’s unclean at the start of the season. In this manner, you will avoid having a hot tub full of water without a filter, which would let germs grow and increase the possibility of something sucking into your hot tub pump and injuring it. You can also detect whether the filter is broken or defective.
Conclusion:
Use a garden hose or sink tap to rinse large debris out of your hot tub filter. The harder materials, such as calcium, need to be soaked in a weak vinegar solution. You’ll need a bucket big enough to completely submerge the filter in a mixture of white vinegar and water, around 50/50. Leaving it overnight is quite safe, particularly if you’re unsure of the last time your filter was thoroughly cleaned. To make sure that every portion is exposed to the cleanser, try to let the hot tub filter submerge for at least a few hours before checking on its progress. It should also be moved once. After you are satisfied with how well the vinegar solution has cleaned and disinfected, make sure all of the solution is gone by giving it a thorough rinse in a sink or with an outdoor hose. Before reinstalling, place it in the sun to let the leftover vinegar odour evaporate and let it air dry.
