Among the most often used vacuums available are shark models. Well-known for their effectiveness, the majority of models feature several filters to collect dust while you vacuum. Cleaning the vacuum’s air filters is essential. “Cleaning your vacuum’s filters as directed will help maintain your vacuum’s suction power over time so that you get the best clean every time you clean,”. You can clean or wash all of the filters that come with your Shark vacuum to reuse them, even the HEPA filters for models that include them.”
How Often Should Your Shark Filters and Vacuum Be Cleaned?
It needs to be cleaned frequently. To keep the suction strong, dust cups and bins should be emptied after each usage or when they are about halfway full. Every month, hoses and rollers should be inspected for breakage, tangles, and blockages, and the outside housing should be cleaned to get rid of dust. According to Levesque, “We’ve got specific information on the best way to clean and maintain your filters in each product’s instruction manual.” The Shark Navigator user manual suggests cleaning the post-motor filter once a year and the pre-motor filters every three months.
Items You’ll Require:
- Tools and Equipment
- Large bowl or sink
- Rack for drying
- nylon brush with soft bristles
- Garbage can
- tiny scissors or a seam ripper
- Garden hose or yardstick
Materials:
- Water that is both warm and cold
- Microfiber cloth or sponge
- A microfiber cloth
How To Maintain The Filter And Shark Vacuum:
Be Careful:
Before cleaning a Shark vacuum, unplug the cord from the electrical socket or take the vacuum out of the charging station.
Examine And Tidy The Roller Brush:
Examine the roller brush. In order to help remove dust and debris from carpets and floors, a vacuum’s roller brush or beater bar is a necessary attachment. The vacuum will not function properly if hair trapped in threads prevents it from turning. To cut through knotted material, use a seam ripper or tiny scissors (manicure). Verify the roller’s freedom of rotation.
Dust Off The Dust Collection Bin Or Cup:
Take out the vacuum’s dust gathering cup or bin. Pour the contents out into a garbage bag. After rinsing the bin with warm water, wipe down the exterior and interior of the container with a microfiber cloth or sponge. If at all feasible, open the hinged sections on top and bottom of the bin and let it air dry.
Examine The Hose:
After disconnecting the hose, look for any obstructions. Examine the hose as you proceed along it for any microscopic holes or cracks that could reduce the vacuum’s suction. Remove any impediments close to the vacuum’s head and disconnect the hose. If you come across clogs, try using a garden hose or yardstick to loosen the debris cluster. Take your time and be cautious to avoid puncturing the hose.
Use a damp microfiber cloth to clean the hose, then make sure it is properly reconnected.
Clear The Screens And Filters:
Find the dust screens and filters. Rinse the foam and/or felt filters with cold water just to clean them. Avoid using any soap or cleaning supplies that could harm the filters. To get rid of the dirt, gently squeeze the filters between your fingers. Until the water is clear, keep changing it. To drain extra water from the filters, roll them in a microfiber cloth.
If there is dirt stuck to pleated filters, carefully brush away the dust with a soft-bristled nylon brush (an old toothbrush would work well). To clean, run cold water under the faucet while holding the filter inside the plastic housing until the water flows clear.
Before reinstalling the filters, place them in a drying rack and let them air dry for at least 24 hours to avoid any liquid getting pulled into any electrical components.
Clear The Housing:
The vacuum’s external housing can be cleaned with a microfiber cloth that has been slightly moistened. Remove any extra dust and pay close attention to any air vents close to the motor.
Examine The Electrical Cord:
If your Shark vacuum is corded, check the electrical cable for any exposed wires or fractures. When you see them, a repair is warranted.
How To Maintain A Clean Shark Vacuum For A Longer Time:
- Frequently empty the dust canister or vacuum bag.
- If there is a lot of dust in your home, check the filters often.
- After each use, brush off the vent covers to get rid of extra dust.
HEPA Filter Cleaning Procedure:
A HEPA (High-Efficiency Particulate Air) filter on your vacuum will capture 99.97 percent of particulates that enter the device larger than 3 microns 1. HEPA filters, which are made of finely woven synthetic fibers, can frequently be cleaned by rinsing them in plain, cold water to remove dust. The manufacturer’s advice for how often to replace the filter on your vacuum should be consulted. The HEPA filter’s lifespan can also be increased by taking it out of the vacuum and tapping it against an outdoor railing or trashcan to get rid of some dust.
How To Empty And Clean The Dust Container On A Shark Vacuum:
A lid-release mechanism that lets the hinged cover slide away from the canister and drop the contents into the trash, emptying the dust canister on Shark cordless and upright vacuums is incredibly simple. You can’t do this with cordless devices until the wand is detached. Pressing the release button located on top of the main unit will allow you to remove the dust canister from the vacuum first on upright corded models.
For cleaning, Shark cordless vacuum models’ dust canisters can also be washed in warm water. When finished, turn it over onto its side and leave the lid open to let the air dry for a minimum of 24 hours before using.
FAQs:
1: How Is The Shark Vacuum Filter Cleaned?
The dirt canister must be taken out before you can begin cleaning the Shark vacuum filter. There are two pre-motor filters in the majority of Shark vacuum cleaners: a foam filter and a felt filter. These filters shield the vacuum’s motor from dirt and dust.
2: Which Attachments Are Used With A Shark Vacuum?
Additional attachments consist of an air-driven hand tool that may be used to dust furniture or clean upholstery and a bare floor attachment that works well on hard floors. Filters are used by all vacuum cleaners to sort through the debris and dirt that is drawn into their systems. Shark vacuums are not any different.
3: What If My Shark Vacuum Instructions Manual Is Missing Or Thrown Away?
Visit the Shark website if you can’t find the instruction booklet for your Shark vacuum or have misplaced it. To access the handbook, click on the model number after selecting the type of vacuum you own. Before cleaning a Shark vacuum, unplug the cord from the electrical socket or take the vacuum out of the charging station.
Bottom Line
Make sure to disconnect the vacuum before doing any maintenance. When a vacuum is plugged in, never clean it. To minimize mess, it’s best to put an old newspaper or piece of cloth underneath the vacuum. You might want to think about cleaning your Shark vacuum outside if it’s really dirty.
